Quantcast
Channel: Fly Nerf: The Blog'O Nerf
Viewing all 96 articles
Browse latest View live
↧

Finished Snap Pistol

January 8, 2013, 3:02 pm
$
0
0
This is my finished version on my Scrap Pistol. It isn't made of scraps any more so I have to change the name. It has 5.5" of a K26 spring in it and it has ranges of 70-75' flat fired from shoulder height. It has a real clothespin as the trigger now because it is nicer. There will be more info after the jump.

More pictures and info after the jump.
I used the keyring because I thought it looked cool. I also used hex bushings because they are easier to remove. There are two back bushings because I couldn't find a second 1"-1/2". It has a pvc handle because I don't have the tools to make a nice wooden one. I really like this blaster and it is really awesome. Here are two more pictures:
I hope you like it!
↧
Search

Goodwill Find

January 14, 2013, 2:49 pm
$
0
0

Hey guys I was @ Good will and found a completely new in box Rapid Fire AS-20 for $15. If I remember right they sell for around $45 to $50 online.
↧
↧

Finished StrikeFire

January 14, 2013, 2:54 pm
$
0
0
Hey Guys. On Sunday I finished my strikefire and it has a black, gold, and white paint job as promised it is not as clean as my sharpshot but I can live with it. it hits around 40-45 feet with a 3 inch barrel.



↧

Snapbow

January 14, 2013, 2:56 pm
$
0
0
I just made a snapbow. It doesn't look perfect but it functions very well. 
It has a pvc stock and a wooden handle unlike my snap pistol.
More info after the jump.
My snapbow has a k26 spring in it like most snapbows so it is getting ranges of about 120' flat. The ranges aren't officially measured but that is what I am estimating those ranges from landmarks in my yard. The stock looks like it is attached with duct tape but it is attached with screws. I just put the duct tape there to make it look clean.
The trigger is duct taped and epoxy puttied on so it is very stable. I made the handle out of oak wood so it was pretty hard to cut. I like the looks of it though so I am keeping it the way it is. All I need to do to the handle is sand it down a bit more so it is very comfy.
That is just another view of it. The stock it attached on a slight angles but you can't really notice it while holding the blaster. It also has a very good seal and takes about 20 seconds to have all of the air get out. I am very happy with this blaster and it is next to my aabow for my favorite homemade.
↧

THANKS!!!

January 15, 2013, 8:19 am
$
0
0
1500 views is alot for a 2 month old blog. Thank you everyone and we will keep the post coming. My next project is either a panther or a Bow n' mallow. I just need some supplies.



↧
↧

New blasters!!!

January 23, 2013, 7:07 am
$
0
0
I just really wanted to make this post about my predictions on the new blasters that Nerf is lining up. I am really excited about these because it seems like they will have a legitimate release. Most of Nerf's blasters have been leaked on websites before but Nerf is keeping these new one top secret. I recently read Mylastdart's article from the toy fair. At the very end of it he says, "Ps. get some new Stefans - like really, really big Stefans, and sniper scopes ready.". This makes me really excited! I am guessing when he says Stefans he is probably referring to a new Nerf gun having some bigger type of dart. I am guessing that Nerf is making some kind of elite Titan. It is just a guess but it would be awesome if it is true. He also tells us to get our sniper scopes ready. This obviously means that we are finally getting an elite sniper rifle! I hope it is in a longstrike shell because longstrikes look awesome. I could see Nerf putting a bigger plunger tube in it to make the ranges be like a sniper rifle. Well, that is it. Tell me what you think in the comments.
↧

Cheapest Nerf Homemade that hits 70ft?

January 27, 2013, 6:00 am
↧

AT3K!!

February 1, 2013, 3:33 pm
$
0
0

First off, I want to say sorry for my lack of posts. As some of you may know, I got foot surgery and I couldn't do any nerf projects. That aside these are my Air Tech 3000's or AT3K's like in the title.
They both function perfectly and I plan on modifying one of them. If you can't see because of the bad lighting, one is silver and one is blue. I will probably be modifying the blue one. Stay tuned for an AT3K mod!
↧
Search

New Fly Nerf Video Intro!

February 3, 2013, 11:51 am
$
0
0
Hi, here is my new Fly Nerf intro for any videos that I will be posting on here.
I can make these for anyone who asks. Just describe to me what you want in the comments if you ever want one. I can probably finish making a really nice intro for you in about a week. 
↧
↧

Shotgun Grip Raider

February 9, 2013, 8:00 am
$
0
0

Hi guys, today I have a shotgun grip raider. This was inspired by Darthrambo's post on Nerf Mods and Reviews from a few months ago. For those of you who don't know, this is made from a Buzz Bee Double Shot. Mine is not of the same quality because it is hot glued on but it is still very stable and very nice. I will be spray painting it once it warms up outside. This is a great mod to do and I recommend that you do it.
Update: That my posts have been sparse recently. This is because I had foot surgery and I have just started up modding in the past week or two. I actually have a lot to post but I haven't gotten around to it. My AT3K is having some problems with the hornet pump I put on it but other than that it is going well.
↧

Busy Week!

February 9, 2013, 8:25 am
$
0
0
Hey Guys,
I have been busy lately and this has been a great week for modding and not posting. So i will have several posts today describing what i have done over the past week.
Thanks,
Aukman
↧

Custom cpvc breech

February 9, 2013, 8:32 am
$
0
0

Ok so the first post is my custom cpvc breech I made for a project Drev made me. Lets just say I traded a hornet for it. But back to the breech. It is about 8"-9" long and made of 1/2" pvc and cpvc that I sanded down. I used a motorized hand sander and then made a dart stop for it.
↧

Snap Pistol

February 9, 2013, 8:41 am
$
0
0
 With breech
Hey Guys second post today is a Snap pistol Drev made for me for the hornet internals. It has a custom wood handle that I made and it has all the custom internals Drev made for his. This was well worth the trade. 
↧
↧

2 AT2Ks!!!!!!!

February 9, 2013, 8:46 am
$
0
0
At goodwill the other day I found these two At2ks in almost flawless shape with the liquitron gauges and everything. Guess how much they were.......... $2 each!!!!! I think they are a complete set and I love vintage blasters so I might mod them but I will probably keep them stock
↧

BIg BAd BOw

February 9, 2013, 8:49 am
$
0
0
This is a BBB i found for $4 when I was out thrifting. I did the simple mods by taking out the air restrictor and shoving cpvc into it. I also added a NF spring. It has a near perfect seal by taking over 30 sec to let the air out.
↧
Search

Can Anyone Identify This Blaster?

February 9, 2013, 8:56 am
$
0
0
It is a 2005 Airzone/Buzzbee thing I found for $1 at Goodwill. It has a tough spring but the priming mech was broken so it is worthless except for the spring and the shell. the spring is tougher than a NF spring.
↧

2000 views!!!!!!!!!!!!!

February 11, 2013, 10:10 am
$
0
0
I used a lot of exclamation points because 2000 views is a big thing. Thank you so much to all of our viewers. 2000 views is an awesome amount for a blog that started in November. Thank you.
↧
↧

Another Snap Pistol

February 18, 2013, 3:45 pm
$
0
0

Here I have yet another snap pistol. I made this one for a friend and he is trading me a blaster for it.
















I used a cpvc tee instead of a keyring for this one. The reason for the weird sharpie marks is because I already had some sharpie marks on there from measuring. I know some people might not like it but I know my friend will. I have not tested the ranges yet but I am guessing that they are better than my other snap pistols. This is because it has completely perfect seal and because the K26 is longer. I am really excited to give this to him.


↧

Good News/Bad News

February 19, 2013, 5:07 pm
$
0
0
Ok Guys I will give you the bad news first. I am giving up modding. I am going to finish my bow'n'mallow and I will paint my BBB but other than that I am done. I just don't have the time for it nor the interest. My favorite part was the thrifting, anyways. I never really cared for the modding as Drev can tell you. Even if you look back to my first post it said i would be doing a lot of paint jobs and Drev would be doing the modding. The Good News is I will still be thrifting and looking for Vintage Blasters. I am going to find the vintage blasters, and Drev and I will sell them thru his Ebay account. I am not giving up on Nerf and certainly not giving up on this blog. I will have those two posts and maybe I will post the panther mod that I did. But other than that my upcoming posts will be about vintage blasters I find. Hope you guys understand and will appreciate my "treasure hunts" thanks for your support of my mods and I hope you buy the blasters I sell on Ebay!!

p.s. sorry for the lengthy post.
↧

First Find/Need Help!!

February 19, 2013, 5:17 pm
$
0
0
Ok so I found this White/Orange Super Soaker Max-D 5000 @ goodwill yesterday and I looked it up and the more common orange and green ones sell for over $30 (correct me if I am wrong). Ok so when I was looking it up I found that this was not an actual color scheme used in the Max-D first release or any of its rereleases. I need your guys help to find out if this thing is 1. incredibly rare, 2. how much it is worth?, and 3. who will buy it? I have not found any sources talking about a white/orange one nor have I found any pictures. If you could post the images on your blogs to see if you can find out the answers to my 3 questions, that would be great. Thanks everyone.
Label: it says Larami 2001 and Hasbro 2002
It has a U.S. patent number of: No. 6,631,830 
It was made in China
(I covered it in pencil so you could read it, it erased all fine with no marks)

Side view of blaster
(it only has one sticker on this side and no signs of stickers on the tank)

↧
Viewing all 96 articles
Browse latest View live
Search